DEFOAMER DR-12
Product Description
PRODUCT DESCRIPTION
DR-12 silicone antifoam is a concentrate of antifoaming agent that can be diluted. The antifoam can achieve long-lasting antifoaming performance in small amounts. It is used in conventional surfactant and polymer foaming systems.
It is recommended to used in sewage treatment, industrial cleaning, and adhesives.
FRATURES
The substance components of the antifoam do not contain the substances listed in the SVHC list of the REACH Regulation.
Antifoaming agent component does not contain NP, APEO.
The antifoam substance component does not contain the substances contained in the ROSH Directive (Restriction of the use of certain hazardous substances in electrical and electronic equipment).
The antifoam can be diluted in a high proportion
It can be mixed with other silicone emulsions.
COMPOSITION
Composed of polyether-modified polysiloxane, polyether polyol, and silicone actives
Product Parameters
TYPICAL PROPERTIES
Test |
Result |
Test method |
Appearance |
Milky white viscous liquid at normal temperature, no sediment,no visible mechanical impurities |
GB/T 26527-2011 |
Viscosity |
500~900 |
GB/T 5561-2012 |
Defoaming rate(ml/s) |
>20 |
Attachment 1 |
Inhibition rate(ml/s) |
29.0±1 .0 |
Note:The information above is for reference and shall not be deemed as a technical indicator. |
HOW TO USE
This product is a mixture. There may be deposits or layering during shelf life, and it is normal. Before using, stir the product evenly at 30 to 60 rpm and it will not affect the performance of the product.
This product can be diluted with thickening water. In the process of dilution, the speed of stirring is between 30 to 60 rpm and the time of stirring is recommended for no more than 10 minutes. Please request the company's customer service department for the specific dilution method. The company accepts no responsibility for any loss which may be incurred by the customer as a result of incorrect usage.
It is suggested that the product is added in a place where the antifoam can disperse easily. The optimum addition level should be preliminarily tested in a laboratory setting.
Packaging&Storage
PACKAGE AND STORAGE
The product is available in 25kg, 50kg and 1000kg plastic buckets. This product can be stored as a normal chemical, away from heat sources and direct sunlight.
Don't add acid, alkali, or salt to this product. Ensure the container is sealed after using.
If burning, put out the fire according to the extinguishing method for general petroleum products .When stored between 5 and 40ºC (41-104ºF) in the original unopened containers, the product is usable 12 months from the date of manufacture.
LIMITIED WARRANTY INFORMATION
Please read carefully: The information contained herein is offered from experiences and knowledge in our company. The proposed application method of this product is for reference only. If it is not sure that the product is safe, effective, and fully satisfactory for the intended end use, please contact the dealer or DERUN directly. It is recommended that the customer conduct preliminary tests, ensuring product safety and effectiveness. Each customer has different system conditions.
Please get in contact with the DERUN Company if you are uncertain that your product is meeting guarantees. If the product is not in accordance with product standards, DERUN will assume liability and refund the payment of goods or replace the product. Our company can provide the SDS on request.
Attachment 1:
1.Test Conditions
Test temperature: 25 ° C
Test medium type: standard foaming liquid (GB/T 26527-2011)
Test medium addition: 150ml
Defoamer use method: Direct addition of antifoam stock solution
Defoamer added amount: 0.2g
2.Testing method:
Take 100g of standard foaming liquid in 250ml sample bottle, heat it to the test temperature in water bath, then add the specified amount of defoamer; place the sample bottle on the vertical oscillator; set the parameters: frequency is 450rpm/min, amplitude is 30mm; respectively oscillate the plastic bottle for different time; After each oscillation stop, record the time t' of' the foam disappeared to see most of the liquid surface, and the foam volume after the shaking of the blank standard solution was recorded as V.
3.Elimination and suppression rate calculation method
The ratio of the foam volume V formed by vertically oscillating the blank foaming liquid to the defoaming time t' of each oscillation after the addition of the antifoaming agent. The data of vertical oscillation for 1 min is recorded as the defoaming rate, and the data of vertical oscillation for 5 min is the foam suppression rate.
ŋ=v/t';
v -Foam volume;
t'-Defoaming time after defoamer addition.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Company Profile
Anhui Derun Import & Export Trading Co., Ltd established in 2017, ISO9001: 2015 certified company.
We focus on sourcing China origin excellent quality resins and additives which are widely used for printing ink. Current products mainly divide into 3 series.
I. Monomers, Oligomers and Photoinitiator for UV ink.
II. Resins for solvent based ink.
III. Resins for water based ink.
We aim to provide solution for the purpose of improving printing ink glossiness, adhesion, leveling, fast drying, yellow resistance, weather resistance and pigment wettability.
Consistent and stable quality are the core responsibility of our company. From initial sample analysis to commercial cooperation, we conduct strict quality control policy. Our lab team are equipped with advanced analysis instruments and trained engineers in order to provide accurate data analysis and technical solutions.
Professional, quality customer service is the core competitiveness of our company. Our experienced team is good at understanding customer's demand and quickly identify the most suitable products for our customers. Our logistic team specialize in sea shipment, air shipment and railway shipment to make sure our materials deliver to customers in perfect condition. We expect to be your most trustworthy business partner, create brighter future together.
Our Advantages
Almost 20 years history of import and export trade process guarantee that our product quality is stable and consistent.
FAQ
FAQ
Q1. How can I get sample to test ?
A: 300gram free samples available. Even free of express charge .
Q2. How about delivery?
A: 10-20 days
Q3. What payment terms are available ?
A: TT, LC, DP, DA, WESTERN UNION, PAYPAL.
Q4. How confirm specification ?
A: Send inquiry mention CAS Number, application and TDS.